[Es2] wiring harness connector contacts

[Steve Eiche]

Chris,
Those are fine, albeit expensive, if you are doing under hood stuff like 
injectors, solenoids or MAF connectors, but Mike won't need any of the 
junior timer contacts for what he is doing under the dash.  He will need 
an assortment of male and female AMP standard timer contacts.  I got a 
bunch from AMP a few years ago that I use for harnesses.  You may be 
able to find what you need by looking on the amp.com, but I find that 
site to be the most difficult site to use that I have ever found.  I use 
a ten year old CD that is the electronic version of their old "big green 
catalog" where you can actually see all of the connector and contact 
options.   Then go to the amp.com site and search on the part numbers 
that you have.

If you have ETKA, I believe that you can also find the standard timer 
contacts individually without wires.

Steve

Miller, Chris wrote:

>Try here:
>
>http://store.yahoo.com/eagleday/ampconnectors.html
>
>I'll be doing similar soon, I hope....
>Chris 
>
>-----Original Message-----
>From: es2-bounces+chris.miller=infofoundry.com at audifans.com
>[mailto:es2-bounces+chris.miller=infofoundry.com at audifans.com] On Behalf
>Of Mike Sylvester
>Sent: Thursday, March 10, 2005 1:04 PM
>To: es2 at audifans.com
>Subject: [Es2] wiring harness connector contacts
>
>I am in the process of merging my 3B harness with the urq harness and
>would like to avoid cutting and splicing wire.
>Does anyone know of a good source to buy the contacts that are in the
>connectors?
>
>Mike Sylvester
>
>_______________________________________________
>Es2 mailing list
>Es2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2
>_______________________________________________
>Es2 mailing list
>Es2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2
>
>
>  
>