[Es2] Clutch roll call

[Ben Klumper]

Peter,

Right now I run a new OEM CQ clutch with no signs of slippage, but I'm only 
at about 275 hp. Let us know if you find anything a bit more robust and 
equally street-friendly!

Ben

----- Original Message ----- 
From: "Peter Schulz" <pcschulz at comcast.net>
To: <es2 at audifans.com>
Sent: Tuesday, March 22, 2005 7:58 AM
Subject: [Es2] Clutch roll call


> Folks:
>
> My S2 engine rebuild is nearing completion at NEA.
> They will be resurfacing my flywheel if necessary, but recommended that I 
> consider a new clutch kit.
> My goal for this engine is to run it originally with the k24 turbo, but 
> eventually move to an RS2 class one, with the requisite upgrades in 
> injectors, ECU sw, etc - so I am looking at eventually getting hp to 320 
> or so.
>
> My intent is to use my S2 for the track, but also have it driveable on the 
> street - so I would prefer a sprung clutch plate.
>
> What are you folks running/planning to run?
>
>
> -Peter
>
>
> 1991 200 20v Q Avant Titan Grey
> 1991 200 20v Q Avant Indigo Mica
> 1991 90 20v Q Red
> 1990 CQ silver (awaiting S2 engine transplant)
>
> Chelmsford Ma, USA
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2