[Es2] rear brake upgrade?

[Matt twentyV]

That is a decent upgrade from stock 245mm.  I wish I
had seen this prior to installing stock rebuilt rear
calipers last winter.
-Matt

--- Peter Schulz <pcschulz at comcast.net> wrote:

> I think that Richard  (Billzcat) Hoffman has one:
> 
> http://www.billzcat1.com/Brakes/rearbrakes.html
> 
> 
> btw, the cheap solution to gummed up rear calipers
> is to rebuild them, and 
> replace the seal on the emergency brake mechanism
> BTDT 4x
> 
> 
> -Peter
> 
> 
> 
> 
> At 05:57 PM 11/8/2005, Ben Klumper wrote:
> >Hey guys,
> >
> >I'm tired of un-ceasing my e-brake levers every
> year so it's time for an 
> >upgrade. I currently have the stock calipers over
> almost new stock S2 rear 
> >rotors. I suppose I could just replace the stock
> calipers with new ones 
> >and call it a day, but I want to see what my
> options are. Anyone have any 
> >advice on a relatively cheap bolt-on rear brake
> upgrade for a CQ with 
> >5x112 hubs?
> >
> >Thanks!
> >
> >Ben
> >_______________________________________________
> >Es2 mailing list
> >Es2 at audifans.com
> >http://www.audifans.com/mailman/listinfo/es2
> 
> 1991 200 20v Q Avant Titan Grey
> 1991 200 20v Q Avant Indigo Mica
> 1991 90 20v Q Red
> 1990 CQ silver (awaiting S2 engine transplant)
> 
> 1990 CQ red ( to part or not)
> Chelmsford Ma, USA 
> 
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2
> 



	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com