[Es2] 3inch downpipe

Fri Oct 7 22:42:12 EDT 2005

Peter,
 The 034efi header is way different than the RS2 or stock manifold and even with the kkk flange would need to be way more than just tweeked to make it work. It might cost less to just start from scratch and build a new DP.

Elijah 

-----Original Message-----
From: lschip at speakeasy.net
To: pcschulz at comcast.net
Cc: es2 at audifans.com
Sent: Sat, 08 Oct 2005 02:02:58 +0000
Subject: Re: [Es2] 3inch downpipe

Peter,
This would work with a K26 hybrid and an RS2 Ex. manifold?
If so, count me in.
Chip
'90 CQ, 3B gathering dust in garage

Message: 9
Date: Mon, 03 Oct 2005 21:41:52 -0400
From: Peter Schulz <pcschulz at comcast.net>
Subject: [Es2] Any interest in a 3 inch downpipe with a KKK flange?
To: es2 at audifans.com

Folks:

Is there any interest in a run of 3in down pipes with KKK flanges?

I've been talking to Javad about using the 034EFI DP, but making it 
available with a KKK Flange.
http://www.034efi.com/product_info.php?cPath=35&products_id=137

Some of the modifications required are the KKK flange, and some "tweaking" 
of the pipe, since in its current form, its designed to work with the 034 
20V exhaust header.

The resulting downpipe would work in the B3/B4 chassis and should also work 
with 4kqs and Urqs...

-Peter

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red
1990 CQ silver (awaiting S2 engine transplant)

Chelmsford Ma, USA 

_______________________________________________
Es2 mailing list
Es2 at audifans.com
http://www.audifans.com/mailman/listinfo/es2