[Es2] Any interest in a 3 inch downpipe with a KKK flange?

[Peter Schulz]

Resurrecting the thread, sorry, been too busy at work.

Intent is to give folks who have installed a 3b/AAN into a type 85 or Type 
89 chassis and wants to run a k24/k26/RS2 off a stock or rs2 exhaust 
manifold an off the shelf 3inch downpipe solution....any local muffler shop 
or welding savy lister should then be able to fab up the rest of the exhaust.

For comparison sake the 2 Bennet 3 inch downpipe is >$900 USD

anyone on the urq list care to forward?

-Peter



At 11:16 AM 10/25/2005, Peter Schulz wrote:
>At 09:41 PM 10/3/2005, you wrote:
>>Folks:
>>
>>Is there any interest in a run of 3in down pipes with KKK flanges?
>>
>>I've been talking to Javad about using the 034EFI DP, but making it
>>available with a KKK Flange.
>>http://www.034efi.com/product_info.php?cPath=35&products_id=137
>>
>>Some of the modifications required are the KKK flange, and some "tweaking"
>>of the pipe, since in its current form, its designed to work with the 034
>>20V exhaust header.
>>
>>The resulting downpipe would work in the B3/B4 chassis and should also work
>>with 4kqs and Urqs...
>>
>>
>>-Peter
>>
>>
>>
>>1991 200 20v Q Avant Titan Grey
>>1991 200 20v Q Avant Indigo Mica
>>1991 90 20v Q Red
>>1990 CQ silver (awaiting S2 engine transplant)
>>
>>Chelmsford Ma, USA
>>
>>_______________________________________________
>>Es2 mailing list
>>Es2 at audifans.com
>>http://www.audifans.com/mailman/listinfo/es2