[Es2] still looking for unstable idle problem

[Steve Eiche]

Elijah,
The first thing that I think of is the idle switch in the throttle 
position sensor.  Make sure the TPS is adjusted correctly, and that the 
idle switch gets engaged.  If the computer doesn't know that the car 
should be idling, it won't go into idle mode.  I really haven't seen 
those go bad on AANs, but it is easy enough to check.  Do you have a 
diagnostic tool (like ProDiag or Vag Com)?  Have you checked the blink 
codes?  Doing a pressure test of the system is always a good idea, but 
check for trouble codes first.

What code are you using now?

Steve

elijahallen92 at aol.com wrote:

>When I start the car it runs fine until it gets warm then the idle starts to go up and down, the warmer it gets the more drastic this becomes and it acts like it will stall. I have change the MAFand ISV and cannot figure out what could be causing this? Anyone have any idea's? I thought maybe a vacuum leak but it seems like I would see that on my boost gauge and it would do it cold as well. Any help greatly appreciated as always.
>
>Elijah
>_______________________________________________
>Es2 mailing list
>Es2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2
>
>  
>