[Es2] anybody out there?

[David Kase]

Try Patrick, he had a few turbos around last year: patrick3 at mindspring.com

Dave Kase

Mike Teter wrote:

> Progress continues here, albeit slow. Too many other projects and the  
> cold weather is no help.
>
> Waiting on head porting work to be completed and needing a turbo to  
> complete the parts. Matching up the 200 wiring harness to the CQ  
> intimidates me as does pulling the dash, so I'm reading every bit I  
> can on solving the wiring puzzle before diving in.
>
> Issues that need advice / help:
>
> I need a new turbo, TEC in Denver disassembled what I had and sent it  
> back in pieces after they closed up shop. Any unwanted K24s out there?
>
> Should I pull a driveshaft from a 4000 CS to use with the RS2 tranny  
> or should I have my CQ shaft cut shorter?
>
> Did I mention I need a turbo?
>
> Kind regards to you all,
>
> Mike Teter
> Colorado Springs, CO
>
>
>> Seems like the list has slowed to a crawl, probably due to winter.
>> My progress:  none in months.  Too poor, too cold, too busy.
>>
>> Need to integrate the 3B wiring to the '91 coupe q soon... if I can
>> recall which wire goes where after not looking at them for months...
>> also need to replace the foam in the airbox and reinstall it.
>>
>>
>> ---
>> Chris Miller
>> Training Development
>> [i] The Information Foundry at Robert Bentley, Inc.
>> Tel: 617.528.4113
>> Cell: 617.875.3792
>> mailto:chris.miller at infofoundry.com
>> http://www.infofoundry.com
>
> _______________________________________________
> Es2 mailing list
> Es2 at audifans.com
> http://www.audifans.com/mailman/listinfo/es2