[Marketplace] Parts: Uprated clutch - Audi A4/90 2.8

[Ben]

Section:  Parts
Title:    Uprated clutch - Audi A4/90 2.8
Price:    225.00
Location: Seattle

Date:     March 17, 2005
Contact:  Ben
Email:    info at ubernugen.com
Phone:    425-941-1938

Description:
PICTURES.

I was sent several incorrect pressure plates by mistake, so here you go!  Stage 2 presure plates. These will fit the 2.8 V6 engine cars from 1992 (100) to 2001.5 and are uprated to roughly 33% more holding power than stock.  Some people report ligher pedal feel after installation, but that is usually after replacing hydraulics and adding things like an aluminum flywheel. At most you will feel a slight increase in pedal pressure, but not enough to bother anybody.  When used with a stock dics, you retain stock drivability with your extra 33% capacity. When coupled with a ceramic disc you can handle over 400 ft-lb of torque, but drivability takes a little hit.  I have all of the parts to build whatever kit you like, just shoot me an email...

URL:
http://www.audifans.com/marketplace/show.php?table=pm_audifans_Parts&id=2940

--
[  This is an automated message    ]
[  You are receiving this message  ]
[  because you signed up for the   ]
[  Marketplace email notification. ]