[Marketplace] Cars: 1990 CQ 20vT project, many parts

Justin Rogers marketbot at audifans.com
Mon May 19 10:19:26 PDT 2008


Section:  Cars
Title:    1990 CQ 20vT project, many parts
Price:    2,200.00
Location: North Branford, CT

Date:     December 05, 2007
Contact:  Justin Rogers
Email:    justin.rogers at biel-jag.com
Phone:    203-671-1526

Description:
PICTURES.

$2200 OBO

the body is basically a shell but is rust free, it was hit and repaired, and had an OK repair job done, with a bit of finishing it could look quite good.

I started removing all the wiring except the lighting stuff... ABS, engine harness, heated seats (I still have the front seats, they are in rough shape) and climate control (still have the modues and such) wiring is mostly to completely removed. so unless you are going to replace all the body wiring, or just use it as a toy/race car... this car wont easly be made into a Daily driver.

It comes with eibach lowering springs (used and have some surface rust) and brand new bilstein HD shocks, only the fronts are installed, rears are still in the boxes.

it has 16x7 5 spoke wheels with sorta cheap tires, but with decent tread left.
it also comes with a set of speedlines that need some refinishing, with mostly shot tires on them.

but the body isnt what someone would really be buying the car for...

The engine:

It is a 7a with JE 9:1 pistons and an extra set of rings.
the rods are stock shot peened units
I bought brand new main bearings, still in the box.
the head is completely rebuilt, and it also comes with ARP head studs.
I have a new timing belt kit, t-stat, engine gaskets, and a few other parts.

It has both the 7a and an AAN intake manifold. It also coms witht he stock 7A injectors (useless) and 42 lb bosch injectrs that are actually out of TBI ford cars, but work fine, I would have them cleaned and flowed though.

The exhaust manifold is a love-fab, this part alone costs over $1000

I bought a Holset HY-35 off of ebay for it, its in good shape and turns freely.

it comes with a rising rate FPR that came with it when I bought it, uninstalled, and a regular adjustable FPR and a gauge.

a large truck intercooler, cut to fit, with custom end tanks...its not pretty but I guess it worked.

the transmission that is in it is in good shape, and it comes with another one that has a shot 2nd gear. The flywheel needs to be resurfaced and it needs a clutch. 

I am capable of delivering the car, within reason. Anywhere in CT for free, beyond that we would have to discuss...gas isnt cheap. also if someone wants to buy it sight unseen and wants me to deliver it, I will require a non-refundable deposit of atleast $150, so if I arrive with it and you decide you dont want it, my expenses are covered.

URL:
http://www.audifans.com/marketplace/show.php?table=pm_audifans_Cars&id=3297

--
[  This is an automated message    ]
[  You are receiving this message  ]
[  because you signed up for the   ]
[  Marketplace email notification. ]





More information about the Marketplace mailing list