[Marketplace] Parts: Coupe shell with welded roll bar

[Peter]

Section:  Parts
Title:    Coupe shell with welded roll bar
Price:    400.00
Location: Chicago

Date:     December 02, 2012
Contact:  Peter
Email:    petarantonc at hotmail.com
Phone:    

Description:
NO PICTURES.

I have a good clean shell, early 1990 VIN.  Lago blue with straight chassis and body panels.  New windshield 2-3 years ago.  Not a roller, so bring your own struts/wheels or it can be carried onto the trailer - it is light.  It was stripped down and I used it as my track car.  Roll bar was welded in with diagonal, harness bar and rear strut bar. Not a full cage.  Engine mounts off the frame rails were reinforced.  Bars welded in for mounting race seat on drivers side and on passenger side I have custom removable aluminum frame-mount. Fenders are there, still. Fuel lines from tank to engine bay are custom aluminum 10mm lines with AN fittings on both ends. All glass intact.  Fedners and q-panels were agressively rolled to easily fit 255 tires or bigger, with right offset wheels.  Missing drivers window regulator motor, but window frame is there.  I do have extra parts that could come with it, like front bumper, hood support, carbon hood, 4.2 V8 engine, etc.  Email if serious.

URL:
http://www.audifans.com/marketplace/show.php?table=pm_audifans_Parts&id=20773

--
[  This is an automated message    ]
[  You are receiving this message  ]
[  because you signed up for the   ]
[  Marketplace email notification. ]