Diagnosing charging problem

[Gfbourcier at aol.com]

Taka,
It sounds like you have a draw issue rather than a charging problem.  Quick 
way to test is to run your multimeter between the negative battery cable (red 
probe from meter) and the negative pole of the battery (black probe from 
meter).  get a reading as to what is the norm, the pull fuses one by one 
until you see the reading jump some and stay.  The circuit you pulled the 
fuse from is the culprit.

Hope this helps,
Gil Bourcier
Columbia, MD USA
90 V8Q
87 4kcsq