PS Pump

[David G]

I have had several sucessful resealing of these pumps.
The last one I did, I found that the pump had previously been "rebuilt" by a
"pro" and upon disassembly, I found a torn O-ring.  This was clearly due to
impropper size.  This O-ring is also one that was not included in the kit.
Make sure you don't miss it. After you split the halfs, you have to remove a
6mm allen inside the pump to get to it.
   Dave G


> Hi Listers,
>
> My PS pump is leaking at the seams (a lot!) and I am leary about
> rebuilding it based on comments I've seen on the list.  Might be a waste
> of time.  A used pump from a '93 90S has come available, and I'm
> wondering if it is  the same pump as in my '90 200TQW.  My car uses
> Pentosin CHF11S.   Any comments would be appreciated.
>
> Bill A.