(no subject)

[PPSoccerwisc at aol.com]

Just replaced back calipers, rotors, pads and emergency brake cables.  Did 
not bleed brakes.  Went into car pumped brakes and discovered that calipers , 
pads have closed on rotors.  How do I get them to reset?  What is the 
recommended distance of pads to rotors in open position?  Another problem 
that I ran into was that the piston in one of the calipers "popped out" about 
1 1/2".  I was able to screw down the piston back into the housing, but how 
do I know that the piston will reset after brakes are applied?