G60 Conversion on `89 90 Quattro

[Mark L. Chang]

On Sat, 26 Aug 2000 JShadzi at aol.com wrote:

>     Just to clear up the brake issue, all the two piece struts on the
> 80/90s use the G54 with the wider bolt spacing.  The 20V sedans and
> Coupes use G-60s basically mounted on the same strut housings with
> different rotors.

Right on, Javad, except that the 20v sedans didn't get the G60s in the
US. Euro versions had that option, apparently, which is why we can get the
funny offset 276mm 4x108mm rotor with a factory part number.

One option that I want to investigate is the possibility of mounting A4
front brake calipers and a 276mm rotor onto my 20v sedan. The A4 caliper
should bolt right up to the strut housing (same spacing) and the specs
call for a 276mm rotor on the A4q sedan. Unfortunately, there seems to be
some confusion, as Ti Kan reports that he had a 276mm rotor (5k-style) and
an A4q rotor hand in hand and the A4q rotor was more like 288mm. Weird.

Any thoughts on the A4 front caliper setup? There have GOT to be some
availble from the rich people on audiworld.com :>.

--
Only Irish coffee provides in a single glass all four essential food
groups:  alcohol, caffeine, sugar, and fat.
   - Alex Levine