Altenator Belt tips 89 100

[Avi Meron]

Good point!
Although if it loosens against engine compression pressure you are in a BIG
trouble!
Take care,
Avi

-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of Ken Keith
Sent: Tuesday, December 05, 2000 2:25 PM
To: quattro at audifans.com
Subject: RE: Altenator Belt tips 89 100

May as well do it so that the bolt tightens instead of loosens.  Not
that the crank bolt should be loose enough to make a difference.

Ken

Avi Meron <avim at pacbell.net> wrote:
>
> The direction it will slip ON not OFF, you only have two choices!
> Take care,
> Avi
>
> -----Original Message-----
> From: njomele hong [mailto:njomhong at yahoo.com]
>
> Thanks! What direction should I turn it? Clockwise?
>
> --- Avi Meron <avim at pacbell.net> wrote:
> > Another way to install the belt is to put it on the
> > pulley "halfway" and
> > than turn the engine over with a socket on the crank
> > pulley, in the right
> > direction.  The belt should slip right on.
> > Take care,
> > Avi
> >
> > -----Original Message-----
> > From: quattro-admin at audifans.com
> > Behalf Of njomele hong
<snip>
> > I was unable to move the altenator close enough to
> > the cranshaft pulley to put the belt on.  There is
> > around a half inch of travel left on the rack that I cannot
> > make with the bolt that has the external gear teeth.