knock sensor 88 5ktq

[isham-research.freeserve.co.uk at pop.pol.net.uk]

> Sometimes you get that fault if the knock sensor is not torqued correctly.
> You can try removing the sensor, cleaning the mounting surfaces and then
> carefully re-torquing the sensor back with a torque wrench.  It is
> critical that the torque be correct.  Meanwhile you can also check the
> condition of the wiring.

Absolutely.  Also check that the connectors are the same type.  They
must either both use tinned copper connectors or both use gold-plated
connectors - mixing is NOT allowed.

--
 Phil Payne
 UK Audi quattro Owners Club
 http://www.isham-research.freeserve.co.uk/quattro
 Phone +44 7785 302803   Fax: +44 7785 309674