floor mats for 4kq; now fogs

[C1J1Miller at aol.com]

Craig Lebakken writes:
----------------------------
Speaking of NLA stuff, our own Huw Powell recently acquired the factory fog
light setup for these cars. Brand new, in the original box. OHHHHohhhh I
wanted those.....but since I already have a foglight switch, and the relay
is already installed, I couldn't justify getting in a bidding war with him,
and a fellow lister at that!

Huw, could you do us less fortunate souls a favor, and provide pointers on
how to modify the center grill section to be like the factory setup?? There
are lights out there that are close in size to the stock ones. And also, was
that some sheet metal bracketry that was provided?
--------------------
I bought a set of those factory fogs way back when for my 4kq.  The 
instructions say to purchase the new lower grill pre-cut for the fogs, or 
modify your own according to the included instructions.  I cut out my own 
grill to fit the fogs, and it looked fine.

The kit included a relay, some wire, a factory switch, two cheap and fairly 
ordinary fogs with "fox" heads on them, and a couple pieces of painted sheet 
steel.  As I recall, the sheet steel was roughly triangular; mounted at one 
side to the bolts holding the lower engine cover in place, and at the other 
side mounted the fogs.  You can easily duplicate this kit, other than the 
fancy dash switch, with aftermarket parts and some ingenuity.
Chris Miller, Windham NH, c1j1miller at aol.com
'91 200q20v ==> http://members.aol.com/c1j1miller/