Eurolight Install - '89 100Q

[Arryn Milne]

At 08:49 AM 11/16/00 -0500, Swann, Benjamin R.  (BSWANN) wrote:

>I will be installing some Eurolights I obtained ( thanks Graydon ) , and am
>working under the presumption that I'll need to relay them.
>
>Coupe of questions:
>
>1. Where is the best place to get a + feed - is the jumper post a good bet,
>or will I damage this by trying to unbolt it?

The jumper post is the location Blau uses for their harness.  Haven't tried 
to install mine yet though, so I don't know how fragile it is.

>2. I take it I should relay both the low beams and the high beams. Yes?

Yes.  Problem with using only one relay for low beams is that if the relay 
fails, you'll be annoying a bunch of people for the rest of your drive 
(assuming you're not carrying a spare and have to use high beams).

>3. Any other tips, BTDT, or links would be appreciated.

Chris Miller has good info, as does Scott Mockrey and AudiDudi.
http://members.aol.com/c1j1miller/index.html Goto the repair index...
http://www.sjmautotechnik.com/elec.html#plight
http://www.mindspring.com/~audidudi/HTML/Eurolights.htm

>TIA,
>
>Ben Swann