Stiffer Wastegate Spring

Efraim egav at wireless2000.com
Thu Nov 23 22:50:12 EST 2000


Hi Greg,
I think the easiest and cheapest route would be tapping and installing the
fine thread bolt into your WG. If you do that, you won't need a new spring.
I never replaced mine, just tightened the old one. This "mod" will certainly
improve your low RPM performance, but you'd have to watch the boost gauge or
you could get this nasty FP cut-off in a most inappropriate time. This is
not a pleasant feeling, believe me, feels like hitting a brick wall. I
experienced it several times when my diaphragm in WG was torn. I drive my
modded car in the city 95% of the time and since reaching 1.8Bar happens
only in the third gear at about 55-60mph on a level road, I can't experience
it very often. However, car feels so much better below 3,000 where it really
counts. Getting off the stop light is a sheer pleasure, no need to drop the
clutch anymore to get ahead of the next guy. I enjoy my 25 min of drive to
work every day. I have to pay for it at the gas pump though because I have
to use 94 octane gas only and I consume more of it per mile than before
(about 16MPG in city compared to 20MPG before the mod), but it worth every
penny.
Regards,
Efraim
'88 5KCDTQ  324K km (201K mi) , 1.8 Bar
'90 90 100K km (62K mi)
Vancouver, Canada


----- Original Message -----
From: "Greg Winston" <winston_gw at hotmail.com>
To: <egav at wireless2000.com>
Cc: <quattro at audifans.com>
Sent: November 23, 2000 6:04 PM
Subject: Re: Stiffer Wastegate Spring


> Efraim,
>
> I realize that I won't get much above 1.4 without modifying the ECU, but
at
> this point I would be happy to have 1.4 bar consistently (and low in the
> tachometer range).  Maybe I just have a weak wastegate spring, but it
takes
> a long hill and a heavy load in 4th gear to even get to 1.3 bar here in
> Kansas.  I figured a stiffer spring would help (and that's why I'm looking
> for a 1.5/1.6 bar spring at the moment instead of a 1.8).
>
> The other thing I'm going to try is to increase spring tension and
therefore
> boost via the adjustable wastegate mod.
>
> Greg
>
>





More information about the quattro mailing list