can't figure how to...
Nick Stuart
thecolony at gagames.com
Sat Nov 25 19:38:36 EST 2000
if its the same as it is on a '87 5000cs then it is fairly simple. There are
two screws that hold it on. The are both on the hinges in the back corners.
If you open up the glove box and shine a flash light in behind you should be
able to see the two screws. Just take out those two screws and it (might)
come out. If not you need to take off the kick-panel on that side. that
takes two screws which are accessed through the ash-tray. Then just pry it
out of the three(?) clips that hold it in place and slide it off the
brackets. Be careful not to bend the kick panel too much or else you'll it
up breaking it. BTDT
This is of course assuming that the 200tq has the same type of setup as the
5000tq which I am not sure of.
Nick Stuart
'87 5000cs tq
-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of Konstatntin Bogach
Sent: Saturday, November 25, 2000 6:31 AM
To: quattro at audifans.com
Subject: can't figure how to...
remove glove compartment in 200tq 89. Looks like screws are hidden. I
will appreciate if you help me find'em.
Thanks.
Konstantin Bogach.
More information about the quattro
mailing list