Seats - 200Q/5000TQ - Memory No Worky

[Swann, Benjamin R. (BSWANN)]

Peter,

I was consulting the '88 5000 diagram, as that is the latest/most similar.
I can't justify buying a Bently set for a car I don't own.

So what is the difference, other than the power connector.  Everything else
seemed to line up wiring wise, but perhaps one of the sockets is wired
differently and I didn't catch it.. I did check all connectors for a one to
one wiring correspondence, but sometimes you miss something in the heat(or
cold, in this case) of a swap.

I still have to check the passenger side heated seat fuse as suggested by
Steve Buchholz 
that the seat memory is on the same fuse as the passenger's seat!

<<But the wiring is different, have you used the controls from the car the
seats came from or are you using the existing ones from yours?

You may have the simple (ha ha) problem of having to wire in the 1990
portion of the seat control wiring loom!! Remember the Bentley for the 200
series covers 89 to 91 and the wiring diagrams are supposed to be
substantially different 5000 to 200.

Do you have access to the Bentleys? I might be able to scan the appropriate
wiring diagrams for you.>>  <--***I'll take you up on this!***

Ben