Rim decoding

[Michael Dewar - Sun Scotland]

The rims should be stamped with a number ETxx where xx is the offset in
mm. Since the replacement rims are the same size as your original rims,
the offsets should also be the same.

Regards,
Mike


> 
> I have an opportunity to get a "new", used set of rims and tires for my '97
> Passat TDI for a good price.  The rims are "Cheviot" and look like BBS
> knockoffs, and look similar to the rims on a '91 200 quattro (mandatory Audi
> content).  The stock steel rims are stamped 6Jx14 and have 195/64R14
> Goodyear Eagle GA tires that are *brand new*.  The rims are stamped 6JJx14
> and have slightly worn 195/60R14 BFGoodrich Comp TAs.  The newer rims bolt
> onto the hubs with no problem.  The question is, do this rims have the
> correct offset so it doesn't mess up the steering geometry, rub the wheel
> wells, etc.?  Next question - leave the tires "as is" or swap them between
> rims, etc?
> 
> Thanks in advance.  You guys haven't steered me wrong yet!  Pun intended :)
> 
> -RJM-