ecu mods--elec. boost controllers

[Ameer Antar]

I couldn't find the MPX4250AP at digikey. have a link?

I don't get why ia's mod would pass emission and some other mod wouldn't. 
please explain...when i last went to emissions they just bring it up to 
50mph on the rollers. As long as they don't take it up to 1.4 bar, there 
would be no apparent difference. Maybe I'm missing yer point....

-ameer

At 06:44 PM 10/19/00, you wrote:
> > I also started thinking about what some people said, and I really
> > appreicate your comments. But actually any mod, other than physically
> > limiting boost pressure to the sensor, will max out at 2.0 bar since the
> > sensor is seeing full boost. The 2 bar sensor issue could be dealt w/ in 2
> > ways. Limit the boost to something like 1.8 bar. Or throw in yer own 50psi
> > sensor. Digikey has some for $17, and I'm sure there are other sources,
> > such as Allied...Actually it'd give me better control cuz then, all the
> > products I'd be working w/ will have their specs known to me. I really
>
>Look up MPX4250AP.  2.5 bar absolute.
>
> > work. But the price would be nothing compared to a TAP or IA chipping.
>
>But it wouldn't be emissions legal which IA is.
>
>Orin.