Brake dragging?

[james accordino]

--- Andrew Lundy <fast928 at prodigy.net> wrote:
> I just had a similar occurrence on my '91 90.  My
> slide pins were rusted to
> the point were they seized

> that's your problem!!  If it is, you could try
> sanding them clean and
> greasing the pins.

Rather than sanding, which only cleans the pin, you
might try putting alittle Brasso or other mild
polishing compound in the hole and then just keep
turning it and working it in and out.  I sat in the
living rm. watching the game one day while I did this.
 You can polish the pins and holes, without removing
to much metal.  With new grease and boots, you've got
10 more years of life, for under $10.  This won't work
if your pins look like they've spent the past 10 yrs.
in salt water, although mine were pretty rusty. 

Jim Accordino