Widest possible tires on a TYP89 sedan?

[Stott Hare]

Actually, the Speedlines off the CQ's are also 15x7".  The sole difference
between the Speedlines that came on the CQ and those from a 90 20v sedan
were the offset.  37mm and 45mm respectively.

HTH,
-S

Stott Hare
85 Callaway 4ktq     89 100q    86 5ktq
with many sets of rims...


-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of Michael Dewar - Sun Scotland
Sent: Thursday, October 26, 2000 8:33 AM
To: Gary.Kaklikian at compaq.com; quattro at audifans.com
Subject: RE: Widest possible tires on a TYP89 sedan?



>
> Yeah, my oversight -- I guess many of the factory wheels did have the
higher
> offset.  I'm looking for a 15" rim wide enough to run a 225/50 but with a
> high enough offset (40-45mm) to clear the rear fenders (like Todd
suggests).
> Ideally, a 7.5" wide rim.
>
> Gary
>
You need a 15" speedline alloy from an Audi 80 or 90 which has an
offset of 45mm and is 7" wide. A Speedline from a coupe is 7.5" wide
but only has an offset of 37mm. Alternatively, 16 spoke Ronal alloys
were available in 7x15 and these had an offset of 45mm. These all use a
4x108 bolt pattern.  Hope this is of help

Regards,
Mike