What paint for chassis parts?

[Todd Phenneger]

POR 15 works well.  Avaiable in many top coat colors but base
coat is silver and black only.   The black base with Chassis
Black paint works well on subframes.  And its paint on with a
brush, adheres to rust.  Just needs rough surface.  Very
durable.  LONG cure time though.
l8r
 Todd

--- Tom Nas <tnas at euronet.nl> wrote:
> Gerard <gerard at poboxes.com> wrote:
> 
> > > First suggestion: Smoothrite (smooth version of
> Hammerite).
> >
> >You mean the can I held in my hand on Sunday afternoon? :)
> >Is this stuff pretty strong when it comes to chipping and
> bombardment by
> >road debris?
> 
> It's OK. Not resistant to petrol, but doing OK with stones and
> such.
> 
> > > Better still: powder coating. Ask Huw Powell. :-)
> >
> >Darn, just put all the bushing in. Don't think the rubbery
> bits would
> >handle the heat of baking.
> 
> Indeed. And it requires cleaning out the insides of the parts
> where the 
> bushings go, or covering them up before spraying with powder.
> But it's the 
> ultimate way of protecting your suspension parts.
> 
> Regards, Tom
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://im.yahoo.com/