Rear pistons on Q

[Peter Guthrie]

isham-research.freeserve.co.uk at pop.pol.net.uk wrote:
> 
> > Hi,
> 
> > does anyone know the proper Hazet tool to turn and push the rear pistons in
> > on a car with rear disks?
> 
> > My old Audi had a nice 12mm 6 point hole, but my 89 Q has 2 slots.
> 
> Hazet 4960-1.  I use a ground-down Sealey cube, but I just found that
> Draper does the _IDEAL_ tool.  Might post a .JPEG of it on the web site.
> 
> --
>  Phil Payne
>  http://www.isham-research.freeserve.co.uk/quattro
>  Phone +44 7785 302803   Fax: +44 7785 309674

There is a Sykes-Pickavant tool available from Halfords in the UK that worked
a treat when I did the rear of A4Q a few weeks ago. It has interchangeable
pop-on
discs available from SP that allow it to be used on pistons with different slot
arrangements although the one supplied with it works fine on VW's and Audi's.

It's currently on loan to a fellow lister in Switzerland, but if anyone in the
UK needs to borrow it let me know.

Peter