Rear pistons on Q

[james accordino]

--- John Corbishley <JCorbs at gtresort.com> wrote:
> There is a Lisle tool that does it.  About $80. 
> Don't have the number
> handy, but I got mine from the local Snapon rep and

Also try an adustable pin spanner wrench (I think
that's what it's called).  I got some from my dad, who
was a machinist.  One with a threaded locking rod
between the arms is best.  Maybe try a bearing house
or industrial tool supply place.  I know they're out
there.  Much cheaper than the offical tool, maybe $10
and easier to source locally.  Mine worked like a
charm.

HTH
Jim Accordino