200tq won't run

[Jukka Majanen]

Otto Hi!

Sorry, I forgot that CD You´ve sent me, I´ll fix the situation just now.

About Your 200: I´m pretty sure You have cheked the vacuum leaks
and the movement of the air mass plate?

Even everything refers to a fuel problem, there is another possibility.
I had in my old ( not Audi, but same CIS and TCI ) turbo just same 
kind of symptoms.

The reason was a bad TCI switch unit. Propably it was well when cold,
but just when it started to lead, it went short and engine died. Again,
after a minute, it cooled down and the engine started but died in few
seconds.

Not pretty sure, but wanted to share my two pennies. Good Luck.

j-pm   



> It is a 1986 10v 200 tq, engine kode KG, non-US car with K-jetronic.
> (sorry that I didn't tell this earlier, I was a bit tired when
>  I wrote the original post)
>
>> Has a code dump from the ECU been performed to check for 
>> malfunctioning sensors? An output sequence test to make sure all 
>> valves are working properly?
>
> My 'check engine' light does not work at the time so the code dump
> is hard to do. Maybe I'll have to fix the meter panel first...
>
> -Otto-