After run pump location on urq

[isham-research.freeserve.co.uk at pop.pol.net.uk]

> Thanks, Phil.  I've looked at your MB on Scott's web site and its hard to
> see the pump.  The tap on the upper radiator hose in particular seems to be
> missing. The FA shows this hose dropping vertically down as opposed to the
> type 44 which runs across to the pump sitting on top of the ABS hydraulic
> pump.  In my factory A/C equipped (York compressor) WX, the low pressure
> suction hose from the evaporator core runs right through the center area.

OK.  I'll whip the hydraulic pump off the next MB I come across and take
a couple of snaps.

The family album picture isn't ideal, but the screw 48 passes through
the front hole of the injector cooling fan bracket and secures both
to the engine.  The MB is tight for space on _both_ sides of the
engine.

If you're going this route, I _may_ have spare 035 121 133T, 035 121
498B and 035 121 498C lying around.

--
 Phil Payne
 http://www.isham-research.freeserve.co.uk/quattro
 Phone +44 7785 302803   Fax: +44 7785 309674