4KSQ does not handle like an all wheel drive

[Swann, Benjamin R. (BSWANN)]

You have and alighnment problem at the very least.  the wear on your tires
should be uniform on all corners.  I don't observe any uneven wear on my
tires even down to the tread wear indicators - well actually I never let
them get that far, but you get my point.

Regards,

Ben

[ How can I tell if my alignment is messed 
up. I do know the wear and tear of the tire is much more towards the inside 
as compared to the outside, but I figured that all german cars do that 
because I was told that the wheels move outward at high speeds. like these 
slashes /----\ the slashes are tires...sorry couldn't think of a better way 
to explain. ]

No! not on these cars.

[I also am aware of the fact that my car has really bad control 
arm bushings, tie rod bushings,] 
That'll cause the problem, especially if they are that way in the rear.

>if that's ok, you probably have loose bushings, links or ball joints that
>are changing the suspension geometry. <--I put my $$ on this being the
problem..Ben
>
>frank