header ceramic/powder coated?
Jeff
fueler at aracnet.com
Fri Sep 8 22:08:17 EDT 2000
Check out this web-site. I don't know how good they are, but it's more info
for you. http://www.performancecoatings.com/
Jeff
----- Original Message -----
From: "Marc Swanson" <mswanson at cisunix.unh.edu>
To: "R Justin Andrews" <rjandrew at post.cis.smu.edu>; <quattro at audifans.com>
Sent: Friday, September 08, 2000 5:21 AM
Subject: RE: header ceramic/powder coated?
> > hello all..
> > I am putting a new motor in my 4kq and would like some more info
> > on ceramic coating/ powder coating my header... i know thatif i could
keep
> > the heat away from the intake the care would have more power especially
> > when i start tweaking it out..
>
> I had all my coatings done by jet hot (http://www.jet-hot.com). Note that
> when you first start the car you'll think its on fire since the new
coating
> had to "burn in" when it first gets hot. Scared the heck out of me as I
saw
> piles of smoke coming from my EM area... Anyhow it seems to be holding up
> ok but I've only put about 500 miles on my 4ktq so far. The stuff I used
> for the EM was called "Jet Hot 2000" since it is supposed to take up to
> 2000+ deg. F. The stirling silver finish can take up to 1500 I think but
it
> is very sharp looking.
>
> I have some pictures of the coatings at
> http://marcswanson.ne.mediaone.net/jet_hot.html
>
>
> HTH
>
> -Marc-
>
> /* +++++++++++++++++++++++++++++++++++++
> +Marc Swanson +
> + +
> +http://marcswanson.ne.mediaone.net +
> + +
> +87 4kcstq +
> +85 4ksq "the spare" +
> +87 5ktq donor (Parting out) +
> +++++++++++++++++++++++++++++++++++++ */
>
> _______________________________________________
> Quattro mailing list Quattro at audifans.com
> To remove yourself, change to digest mode, or temporarily stop delivery
> please visit the web interface at
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list