350 HP Potential for CIS

[Nate Stuart]

> If one goes to EFI, are there injectors that will fit into the head?
> Who makes them, and where can I find them?

Yes there are injectors that will fit the head. You just have to get the
injector inserts that were used for the VW digifont injection though so that
the injectors will meet up to the head properly. If 350+hp is what you are
looking for, then you want to get the injectors from a Ford Superbird, or
Buick GN/GNX. As for the fuel rail, you are on your own. One major concern
is the fact that the electronic injectors are quite a bit taller than the
CIS, especially with the fuel rail. So you either have to bend the rail near
the throttle cam, or do what I did, and get creative. I actually pulled the
whole throttle assembly apart and turned it around, so that the throttle cam
is now on the other side (pass side) of the TB. Should be plenty of room
there now. :)

Later,
-Nate