code 2221 following R/Z mod
Efraim
egav at wireless2000.com
Tue Sep 19 19:21:18 EDT 2000
Thanks, Orin. You were absolutely right, it was backwards. I reversed its
polarity and Bingo! no more yellow light and no more retardation.
Efraim
'88 5KCDTQ 320K km (199K mi) , 1.8 Bar
'90 90 99K km (61K mi)
Vancouver, Canada
----- Original Message -----
From: "Orin Eman" <orin at wolfenet.com>
To: "Efraim" <egav at wireless2000.com>
Cc: "quattro" <quattro at audifans.com>
Sent: September 19, 2000 12:19 AM
Subject: Re: code 2221 following R/Z mod
> >
> > "Manifold Pressure too low, too high, control difference.
> > Vacuum hose to ECU pressure sensor
> > Vacuum hose missing or leaking,
> > Check hose
> > Symptom: Loss of Power"
>
> Guess what the ECU uses to determine this.
> The pressure sensor. What did you just do?
> You messed with the output of the pressure sensor.
>
> Perhaps the zener is backwards.
>
> Orin.
> _______________________________________________
> Quattro mailing list Quattro at audifans.com
> To remove yourself, change to digest mode, or temporarily stop delivery
> please visit the web interface at
> http://www.audifans.com/mailman/listinfo/quattro
>
More information about the quattro
mailing list