Printed Circuit

[Marc Swanson]

>     Some of the bulbs are burnt out on the printed circuit of the
> diff lock
> switch on my '86 5KTQ. I can't find replacement bulbs anywhere,
> The car is a
> 12 Volt system, is the printed circuit 12 Volt too or is it 9 Volt?
> Has anybody had any experience with this problem? I don't feel
> like giving
> audi my lifes saving for a new printed circuit. TIA

I stole some of the bulbs out of my 5kt parts car when the bulbs went on the
diff lock switch in my 4ktq.  I know you can get them new from the dealer
(for an arm and possibly part of a leg) OR you could get the generic ones
from an auto parts store and rip the old bulb out of the socket (they are
soldered in) and resolder the tiny legs on the socket.  Or you could call
your dealer and ask for P/N 431 919 040.  I have no idea how much they cost
but you never know.. they might be cheap if you're lucky.

Later


-Marc-


/* +++++++++++++++++++++++++++++++++++++
+Marc Swanson                          +
+                                      +
+http://marcswanson.ne.mediaone.net    +
+                                      +
+87 4kcstq                             +
+85 4ksq  "the spare"                  +
+87 5ktq   donor (Parting out)         +
+++++++++++++++++++++++++++++++++++++ */