Audi tool 10-202

[Buchholz, Steven]

I'm sorry to say that I don't have the part number handy, but the pilot
bearing is a pretty standard roller bearing ... there are a lot of sources
for the tool other than from Audi.  What you are looking for is a puller
that has jaws that expand to grip the bearing housing from "behind" ... the
one I have came with a built in slide hammer to get the bearing out ...
others use a threaded puller.  

Some people pack the hole in the bearing with grease and then whack a shaft
(that fits the hole in the bearing with as little clearance as possible)
with a hammer.  

HTH!
Steve Buchholz
San Jose, CA (USA)

> 
> Wondering if anyone has Audi 10-202 tool on Long Island for 
> removing the pilot bearing from the crankshaft.  If I can't 
> get this tool, is there a safe alternative to R&R this 
> bearing.  BTW, doing this as part of procedure due to slave 
> pushrod stuck in clutch lever.  Aren't I the lucky one :-O ??!!