'88 5KSQ Brake Master Cylinder Replacement

[Ameer Antar]

It's an easy job to replace the m/c, do just like you said and remove just 
the m/c. But you have to reconnect the brake lines and bleed the whole 
system, unless you can prime the m/c w/ brake fluid. But it can get messy 
if you prime the pump. I just replaced and bled the lines. Brakes work 
perfectly. good luck.


At 10:01 AM 9/28/00, you wrote:
>I've pretty much decided to replace the brake master cylinder on my '88 
>5KSQ.  Any BTDTs on this job?
>
>Can I leave the servo in place on the firewall and just unbolt the master 
>cylinder from the servo?  2 easy-to-get-at bolts vs. 4 difficult ones.
>What's in there when I take the master cylinder off the servo?
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>Share information about yourself, create your own public profile at 
>http://profiles.msn.com.
>
>_______________________________________________
>Quattro mailing list    Quattro at audifans.com
>To remove yourself, change to digest mode, or temporarily stop delivery
>please visit the web interface at
>http://www.audifans.com/mailman/listinfo/quattro