trans removal 5ktq

Nate Stuart nathan.stuart at maine.edu
Sun Apr 8 21:13:59 EDT 2001


Don't bother, the several clutch slaves I've gotten to have all been buggers
to get out even with the tranny out. Just undo the hydraulic fitting between
the flex hose and the hard line on the firewall. It's quicker, and bleeding
the clutch is a cinch as long as you have some sort of pressure (not
vacuum!) bleeder. If I remember correctly the Bently called for the downpipe
to come out too. I was able to do it with it still in there (it was a pain
though).

Good luck!
-Nate
'89 90q
'87 5ktq (donor...)
ex '87 5ktq
ex '86 4kq

> I'm doing the clutch on my 87 5ktq. First, I got the roll pin out of the
> trans housing but the clutch slave still will not move. I beat on it from
the
> front on the boss where the hose goes in, but no movement. Any tricks or
> hints? Second, in Mr. Bentley it says to remove the front exhaust pipe. Is
> this really neccessary? Boy oh Boy I hope not. Any other hints on the job?
>
> TIA,
>
> John Katos
> West Dundee, IL
>
>





More information about the quattro mailing list