Headliner glue...*again*

[Kneale Brownson]

Just curious whether you priced a replacement board?


At 10:10 AM 04/18/2001 -0400, Rex Pedersen wrote:

>Even though Bentley says you can't remove the headliner without cutting, I
>have removed two just fine. It is a pain and sometimes you will break a
>small part, but a little epoxy can cure that. A large putty knife works to
>loosen the headliner. It is a bit of a trick to get it out of the car, but
>you can..
>I used lacquer thinner to remove all the glue goo from the headliner
>(outside with lots of ventilation!). Lots of thinner and rags will clean it
>down to the board.