O2 Sensor Questions

[Marc Swanson]

> Make sure you crimp wires using butt splice. Soldering can be
> done too, but
> it is not recommended and is difficult because it requires
> hi-temp soldering
> iron.


I dunno.. not to start a "solder vs crimp" war but I've got an El-Cheapo
(TM) butane soldering iron and the solder seems to bond to that type of wire
just fine.  Throw a little heat shrink on, solder and you're done with a
nice weatherproof connection that will outlive the life of the o2 sensor.

Just my $.02

-Marc-

/* +++++++++++++++++++++++++++++++++++++
+Marc Swanson                          +
+                                      +
+http://marcswanson.ne.mediaone.net    +
+                                      +
+87 4kcstq                             +
+88 90q                                +
+85 4ksq                               +
+87 5ktq   donor (Parting out)         +
+++++++++++++++++++++++++++++++++++++ */