door wires fix ?

[Konstantin Bogach]

I think that moving the splice point out of dangerous spot (where wires are
bent) is a key here.  But how to do that. I looked the loom going to the door -
I don't know how to pull the wire out of loom with unwraping it all the way. I
am afraid to break something  pulling it  out of door. I hate to take off a
door panel.

Konstantin Bogach.

Efraim wrote:

> If you do your repairs in the doorjamb the wires will break again in the
> different place regardless whether you crimped them or soldered. I've done
> it three times before using both methods and my front driver side one touch
> down quit working again a week ago. Grrrr.
> Efraim
> '88 5KCDTQ  328K km (204K mi) , 1.8 Bar
> '90 90 105K km (65K mi)
> Vancouver, Canada
>
> ----- Original Message -----
> From: "Konstantin Bogach" <kbogach at home.com>
> To: <quattro at audifans.com>
> Sent: April 21, 2001 12:49 PM
> Subject: door wires fix ?
>
> > Hi listers.
> >
> > What is the best  way to fix a broken wire in door loom? Soldering?
> > Crimping? The later  is easier but I am afraid the wire will break soon.
> >
> > Konstantin Bogach.
> >
> >