HELP: injector air shroud ... Removed.

[Konstantin Bogach]

Thank you everyone who responded to my scream.  Things were not that bad as
it looked at the first moment.  I had 2 cones stuck in the head.  Pick did
not help until I sprayed carb cleaner in to dissolve gum.  Then one cone
came alive and moved. Second cone did not move after 15 soaking  so I
decided to pull stronger.  It is important to notice that cone sit profile
is such that lower part of the cone protrude through head wall as opposed to
upper part which does not go all the way through the hole in  the head wall.
So, pick hook should grab at lower rather than upper part or sides of a
cone. I pulled it and it came out. Thanks gods.

Thanks to you all again.

Konstantin Bogach.

Konstantin Bogach wrote:

> Hi list.
>
> I am stuck. One of air cones came off brass insert when I removed it and
> stuck in the head (did not drop yet).  What to do??? I hate to take off
> manifold because of this!
> Any advise will be greatly appreciated.
>
> Konstantin Bogach.
> 200tq '89
> 200tqw '89