Timing Pin.

[DGraber460 at aol.com]

My URQ lost this pin due to a rear oil pan bolt finding it's way into the 
bell housing.
The pin is hard to see, and is not at TDC. Turning the motor with the starter 
is usually too fast to see the pin.
If indeed it is missing (very rare but does happen), it can be accessed & 
replaced in the starter opening. An approprialtely sized metric drill bit can 
be cut and driven into the hole.
It's royal pain but I'm here to testify that it can be done.

Dennis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/quattro/attachments/20010806/ae660c0f/attachment.htm