[200q20v] Re: Fuel Pump Replacement

[ZZracing at aol.com]

I used either a screwdriver or a socket extension, can't remember which, but 
believe it was an eight inch socket wrench extension, to bridge the 
indentations on the holding collar.  If you can get it off, you can certainly 
get it on.  I did the fuel pump replacement in this manner after sitting and 
studying the job for an hour and a half, and some "fear."  It's been fine for 
4K miles.

Dave Zube
1990 200Q Avant

> Message: 7
> Date: Tue, 07 Aug 2001 13:30:05 -0400
> To: George Sidman <sidman at montereynet.net>
> From: "Doyt W. Echelberger" <Doyt at buckeye-express.com>
> Subject: Re: [200q20v] Re: Fuel Pump Replacement
> Cc: quattro at audifans.com
> 
> At 09:46 AM 8/7/2001 +0100, you wrote:
> >I am getting mixed messages regarding needing the special
> >tool to R&R the fuel pump. Chris Miller's site explores the
> >job and discusses the need for it, but others say no.  Has
> >anyone successfully done this job without the tool?  And, is
> >there a secret technique?
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.audifans.com/pipermail/quattro/attachments/20010808/c7c951f8/attachment.htm