hard starting 90q

[Paul Heneghan]

Hello Graham,

I had all the symptoms you describe on my 80q when a vacuum hose fell off (I
can't remember which one - I vaguely remember it going onto the inlet
manifold and being about 15 to 20mm diameter).  It's happened me twice now.

Paul

Date: Wed, 29 Aug 2001 11:22:29 +0100 (BST)
From: Graham Thackrah <gthack at geog.ucl.ac.uk>

>Cheers in advance for any advice, my UK 85 90q (US 4kq +/-) stalled whilst
>idling the other day and has since been hard/impossible to start. 
...
>When the car does start, after much
>cranking, it stumbles badly when you blip the throttle, rather than
>depressing it gradually. It idles fine though and if you do depress the
>throttle gradually it will run fine up to high revs. If you shut it down
>and try to restart immediately it will fire up fine, leave it for a while
>and it gets harder.



This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
BBC, unless specifically stated.