No fuel/spark

[e2e]

1990 200tqa
1B 10v turbo
Mac 12 ECU
I drove 400Km yesterday no problem...
This morning nothing, no fuel pump, no spark. The battery is fine the fuel
pump relay is fine, the fuel pump runs when shorted, the socket the relay
slots into tests out fine. The ECU gets power, the driver module gets power
but no signal. Distributor turns.
Upon cranking the autocheck flashes up the oil warning and beeps three
times, at the same time the oil gauge reads 2 bar, oil level 100%.
Gurus Please anoint me with your wisdom.....
--
Sam Clarkson