80tq: 10v Turbo-Header

[JShadzi at aol.com]

Well, yall, here it is, finally ready for installation, see pics here:

http://www.mswanson.com/phpix/?mode=view&album=javad%2Fheader&pic=header+botto

m+2.JPG&dispsize=800&start=0

I will add more info and pics to 80tq.com soon, with more information about
how I built it etc.

I made it using 1 3/8" Schedule 10 (.109 wall) 304 stainless, at that wall
thickness, 321 is not really necessary.  Actual ID is about 1.41", flanges
are stainless also.  On the end of it will be a Garret T3/T4 turbo capable of
flowing over 450hp.  It places the turbo where the airbox used to be.

I will be finishing the installation in the next week or two, so stay tuned
for updates of how this baby actually works.

Javad
80tq.com