10v Turbo-Header

[alan pritchard]

Wow, thats exactly what im after!!, hope you dont mind, but, how much did it
cost to be made? and do you have any drawings that you wouldnt mind
publishing? thx
----- Original Message -----
From: <JShadzi at aol.com>
To: <quattro at audifans.com>
Sent: Friday, December 07, 2001 5:13 AM
Subject: 80tq: 10v Turbo-Header


> Well, yall, here it is, finally ready for installation, see pics here:
>
>
http://www.mswanson.com/phpix/?mode=view&album=javad%2Fheader&pic=header+bot
to
>
> m+2.JPG&dispsize=800&start=0
>
> I will add more info and pics to 80tq.com soon, with more information
about
> how I built it etc.
>
> I made it using 1 3/8" Schedule 10 (.109 wall) 304 stainless, at that wall
> thickness, 321 is not really necessary.  Actual ID is about 1.41", flanges
> are stainless also.  On the end of it will be a Garret T3/T4 turbo capable
of
> flowing over 450hp.  It places the turbo where the airbox used to be.
>
> I will be finishing the installation in the next week or two, so stay
tuned
> for updates of how this baby actually works.
>
> Javad
> 80tq.com