Samco hose pic

[Ken Keith]

Hi Jim,

Do you happen to have the part number for the one you are using?

Is it cut down into this little piece shown here?

http://www.geocities.com/jeg1976/intake.jpg
or,
http://www.geocities.com/jeg1976/driver1.jpg

It looks like the whole accordian section is gone.

I understand that it is very difficult to stretch that material (onto the MC
throttle body).  I haven't handled it, but that's what I've read here.

Thanks,

Ken

On 10 Dec 2001, at 11:00, Jim Green wrote:


>
> --- Ken Keith <auditude at neta.com> wrote:
> > Here is a pic of what I was asking about:
> >
> > http://www.euro-car-service.com/s4s6hose3.htm
> >
> > It's an ur-S4 intercooler to throttle body hose.  I
> > would like to use a hose
> > like this to connect a 5kcstq double-pass
> > intercooler to a KH automatic
> > throttle body and IM, on an MC-1 motor, in a '85
> > 4Kstq.
> >
> > I guess what I'm asking is if the outside diameters
> > of the KH (automatic)
> > and AAN throttle bodies are the same.  Should I
> > worry about the
> > intercooler end as well?  MC-1 vs. AAN?
> >
> > Thanks,
> >
> > Ken
>
> Use one of these,
> http://www.tap1.com/Modifications_by_Model/5000_turbo___tq/hoses.jpg
> IT does have a space for a bypass valve on the other
> side that you can't see in the pic.  I have one on my
> round KH TB, but I think you can stretch them over the
> teardrop shaped ones too.
> HTH
>
> =====
> Jim Green
> '89 90tq EFI
> http://www.geocities.com/jeg1976/car_home.html
>
> __________________________________________________
> Do You Yahoo!?
> Send your FREE holiday greetings online!
> http://greetings.yahoo.com
>