Samco hose pic

[JShadzi at aol.com]

Ken, the 20v uses a 5mm bigger TB, so it would be a very tight fit.   I think 2B might have something they had Samco make on the shelf, however, that will do what you need.

Also, finding a KH intercooler is an easy solution, it has a 1" port located on the endtank ready to go.

Javad
80tq.com

In a message dated Mon, 10 Dec 2001  1:47:53 PM Eastern Standard Time, "Ken Keith" <auditude at neta.com> writes:

> Here is a pic of what I was asking about:
>
> http://www.euro-car-service.com/s4s6hose3.htm
>
> It's an ur-S4 intercooler to throttle body hose.  I would like to use a hose
> like this to connect a 5kcstq double-pass intercooler to a KH automatic
> throttle body and IM, on an MC-1 motor, in a '85 4Kstq.
>
> I guess what I'm asking is if the outside diameters of the KH (automatic)
> and AAN throttle bodies are the same.  Should I worry about the
> intercooler end as well?  MC-1 vs. AAN?
>
> Thanks,
>
> Ken